Popcorn Machine

Operating procedure

1.Place the corn popper on a dry,level surface.Protect from rain and other weather elements.Do not install near pool or water outlets.Plug the unit into suitable grounded electrical outlet.(Please check if the outlet voltage is matching with rating label specified next to the power cord).

2.Main unit has 3 function switches:Spot Light & warmer, Stirrer,Pot Heater.

3.Hook the stainless steel pot onto the hanger of the main unit.(Note:Roller bar should be on the door side and also check if gears between pot and ceiling are perfectly matched).

4. Plug in the power cord(hanging from the main unit ceiling) into the bottom of the stainless steel pot.

5. Switch the light and heater to ON.Popping pot should be pre-heated for 3 to 5 mintues.Cut off top of oil section on pouch and squeeze oil into pot.Allow a few mintues to melt oil. If using other suitable ingredients,have pre-measured portions ready in advance.Add oil.(Max 15g/48oz.oil).

6. Next using suitable ingredient,have pre measured portions ready in advance. (8 oz.uncooked popcorn kernels).Add popcorn,caution:lid is hot,recommended wearing oven mitten to contact metal pieces.Close lid.

7. Switch the stirrer to ON so that it starts stirring.

8. Close the doors on the main unit carefully.

9.Popcorn starts popping out through the lid after about 2 to 3 mintues.

10. When poping stops(no more popping sound form pot),switch the stirrer and heater to OFF,popping is completed.Rotate the roller bar on the pot and pour out all remaining popcorn.Gently shake if necessary.

11. Heater switch must remain OFF if the unit is not popping.Only the spot light warmer should be left ON,this will keep the popcorn warm,dry and tasty for a longer period of time.

12. Serve popcorn with scoop provided.Note:do not add butte or other liquid flavoring in main unit popcorn bit.Avoid a big mess!Remove popcorn to suitable serving bowl or popcorn before adding this type of flavoring.

13. Always remove plug from power supply before cleaning and of the unit is not being used for a period time.

Thanks for reading.